• Predator 228 with Elabo Kit

    Predator 228 with Elabo Kit by Wismec, Dual replaceable 18650 cells and with 228W/50A Max Output, 4.9ml E-liquid capacity, upgradeable firmware.

  • Wismec Reuleaux RX300

    RX300 supports various modes as well as custom logo and preheat function. In addition to the fashionable colors and changeable stickers for your preference, the upgradeable firmware also makes it popular and up-to-date.

  • Reuleaux RX200S

    In addition to the high power output of 200W, the improved 0.96inch OLED screen which presents all parameters more clearly is a bright spot of the device.

  • Reuleaux RX200

    Features the use of three removable 18650 batteries and reverse polarity protection

  • Presa TC100W

    Not only does the Presa TC100W have magnetic back cover and 0.96inch OLED screen, it also features the application of single 26650 or 18650 cell to your preference.

  • Presa TC75W

    The optional VW, Bypass, TC-Ni , TC-Ti and TC-SS andmode will provide you with different vaping experiences.

  • Presa TC40W

    Impressive vapor without dry hits can be produced under TC-Ti/TC-Ni mode while the consumption of electricity and liquid is reduced substantially

  • Reuleaux DNA200

    In addition to the magnetic back cover which matches well with the body, the high power output of 200w will make you own a wonderful vaping experience.

Thursday, July 13, 2017

0

Wismec Reuleaux RX GEN3 With GNOME atomizer Launching

RX200, as the 1st generation of RX series.
RX200S, as the 2nd generation of RX series.
What will be the 3rd generation of RX series?
Yes, that's right. that is Reuleaux RX GEN3, the third generation of Reuleaux box mod, is smaller, lighter and more ergonomic than previous versions. Having a big 1.3inch OLED screen and brand-new interface, the GEN3 comes with three replaceable 18650 cells whose maximum output can reach 300W. Moreover, the latest bespoke firmware tailor made for the RX series will make GEN3 always up-to-date.

About GNOME atomizer, that packs the new WM coils for optimal flavor and retractable top design for easy filling can perfectly pair with GEN3 in terms of appearance and performance.

Do you like them?

For more information about Wismec Reuleaux RX GEN3, please click http://www.wismec.org/reuleaux-rx-gen3-tc300w-box-mod-with-gnome-kit.html

Wismec Official Authorized Dealer

July 13st, 2017

Wednesday, June 28, 2017

0

Wismec TC Software for Upgrading Reuleaux RX300

The newest Firmware Version V5.14 make the Reuleaux RX300 Maximum output upgraded to 400W, you can have a big vapor experience.
You can download all firmware versions for Reuleaux RX300 at http://couponproducts.com/go/rx300firmware/
About RX300,having 0.96inch OLED screen, RX300 supports various modes as well as custom logo and preheat function. In addition to the fashionable colors and changeable stickers for your preference, the upgradeable firmware also makes it popular and up-to-date...Read More

Tuesday, June 27, 2017

0

Pls upgrade the firmware to enhance the safety of your ExoSkeleton ES300

Dear friend,
As of June 14 2017, Wismec released an updated firmware V1.02 as the default firmware for the EXO SKELETON ES300. To enhance the safety of your device, please download the latest firmware and upgrade your ES300 by following this link: https://drive.google.com/open?id=0B44wBJF2IxHcV3pmT1J3ZUpUdzA
For further inquiry, please contact service@wismec.com. We are sorry for the inconvenience this may cause and continuously strive to provide you with the best service.
Your understanding will be highly appreciated.
Thank you.

Monday, June 26, 2017

0

Firmware For Sinuous P80 Vape Mod

Latest Version:(TC Software 1.10)
Firmware V1.00 (Click left link to download it)
Date Updateed:June 20th, 2017
License:Software
Supporting:WIN10/WIN8/WIN7/XP/MAC

About Sinuous P80,It is a new flagship e-cig mod designed by sinuous designs, impresses us with its centered 510 connector and side OLED display. Powered by single 18650 cell, it reaches a mighty 80W output along with a sequence of other unique features including 2A quick charge, preheat and LED light with changeable colors. Featuring the intuitive slide-top fill solution and creative childproof lock system, the Elabo mini atomizer with powerful WS coil can perfectly pairs with SINUOUS P80.
0

How many cell do you prefer?

Whether single or dual cell, both predator 228 and sinuous p80 are my favorite. What about you? How many cell do you prefer? Let me know your choice.

Friday, June 23, 2017

0

Have you ever fallen in love with Sinuous P80?

Compact Size, Attractive Colors, hidden Fire Button and Side 0.96inch Screen design,2A Current for Quick Charge. Have you ever fallen in love with Sinuous P80? know more at http://www.wismec.org/sinuous-p80-with-elabo-mini-kit-tc80w-with-2ml-starter-kit.html

Wednesday, June 21, 2017

0

User Manual For Predator 228

Predator 228 OverView

Specification & Features

Weight: 166.2g
Size: 43.6mm*29mm*86.7mm
Thread Type: 510 spring loaded thread
Cell Type: High-rate 18650 Cell (discharge current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output Wattage: 1-228W
Resistance Range: 0.05-1.5ohm for TC modes
             0.1-3.5ohm for VW mode
Temperature Range: 100-315℃/200 -600℉(TC modes)
Maximum Charging Current: 2A
Maximum Output Current: 50A
Output Voltage Range: 0.05-9V

How to use:
1. Power on/off: Unlock the bottom cover button and put two 18650 cells into the battery body. Press the fire button 5 times in quick succession to turn the device on and off.
(Note: Please adjust the wattage to a proper range to match the atomizer you used before using. Moreover, please be careful not to use battery with torn shell for safety.)
2. Stealth function: While the device is on, simultaneously hold the fire button and the left regulatory button. This will switch the screen display on and off.
3. Key lock function: While the device is on, simultaneously press the two regulatory buttons. This will switch between Key Lock and Key Unlock function.
4. Micro USB Port function: The USB port can be used for charging and upgrading firmware, it is better to take out the cells and charge them through external charger.
5. Switch the display mode: By pressing the left and right regulatory buttons simultaneously in shutdown state, the screen display will rotate 180 degrees. You can then view the screen from two kinds of angle through this operation.
Shift among VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Press the fire button 3 times to enter into the mode options. Then press the right regulatory button to switch between VW/TC (Ni, Ti, SS)/TCR (M1, M2, M3) mode.
Press the fire button to confirm.
Under TC/TCR mode, while the mode sign flashing, press the left regulatory button to enter into its submenu. Then press the right regulatory button to choose TC-Ni/Ti/SS (TC mode) or M1/M2/M3 (TCR mode). Press the fire button to confirm.
VW Mode:
In this mode, output wattage can be adjusted from 1W to 228W by pressing the regulatory buttons, right to increase and left to decrease.
TC-SS Mode: The TC-SS mode is suitable to SS316 coil.
TCR (M1, M2, M3): In TCR (Temperature Coefficient of Resistance) mode, users can set the parameters according to the TCR of coil.
The Setting of TCR Mode: In powered-off state, keep pressing the fire button and right regulatory button simultaneously, then you enter into the TCR set menu:
(1). Press the left or right regulatory button to choose among TCR M1, M2 and M3;
(2). Press the fire button to confirm the mode you chosen.
(3). Press the left or right regulatory button to increase or decrease the parameter according to the TCR of coil;
(4). Keep pressing the fire button or leave the interface for about 10seconds to confirm.
Following is the TCR value range for your reference:
Note:
1. The TCR value in the sheet is 105 multiplied of the actual TCR.
2. The TCR value range is 1-1000.
Supplementary TC Modes Functions:
Temperature adjustment: In TC modes, the temperature can be adjusted from (100-315℃ or 200-600℉ ) with the two regulatory buttons, right to increase and left to decrease.

Shift between ℃ and ℉: If you increase the temperature to 315℃, and continue to pree the right regulatory button, the temperature readings will automatically change to the lowest Fahrenheit (200℉). Equally, If the temperature is decreased below the minimum (100℃), the unit will change back to ℉ automatically, and the temperature will start to decrease from 600℉.

Wattage adjustment: While the wattage sign blink, press the right or left regulatory button adjust the wattage, and press fire button to confirm. Long pressing the right or left regulatory button will make the wattage setting rapidly increase or decrease.

Resistance locked function: While the resistance sign blink, press the right regulatory button to lock or unlock the resistance of the atomizer. (Note: Such operation should be carried out at room temperature.)

New atomizer installation: In TC mode, be careful to attach new atomizers that have cooled to room temperature. If a new atomizer has not cooled down before attaching, the temperature may read and protect incorrectly until the new atomizer cools.
Note:
1. When you connect a new atomizer or disconnect and reconnect your existing atomizer, the device will prompt you to confirm this change and a message will prompt “NEW COIL RIGHT, SAME COIL LEFT”. Press the right regulatory button to confirm that a new atomizer has been attached. Press the left regulatory button to confirm that the same atomizer has been reconnected.
2. When using normal coil or the resistance of coil you used is higher than 1.5ohm in TC modes, the device will automatically switch to VW mode.

Shift between Puff and Time: While the user information sign blink, press the right regulatory button to shift between Puff and Time.

Logo Mode:
When powered on, press the fire button and right regulatory button simultaneously and then you enter into the Logo Mode, Press the left regulatory button to choose between logo “ON” and “OFF”, and press the fire button to confirm.
You can download our logo. You can also make logos to your preference, and then import it through software. The logo should be monochrome image in the format of bmp with limited 64*48 pixel.

The setting of Preheat Function:
(1). Long press the fire button and right regulatory button simultaneously to enter the menu.
(2). Press the right regulatory button to enter the preheat setting menu.
(3). Press the fire button to switch between preheat power and preheat duration.
(4). Press the left or right regulatory button to decrease or increase the parameter.
(5). Long press the fire button to confirm.

USB Charge Function:
1. Function of charging mobile phone: Connect the RC adapter with mobile phone through USB cable. When the device is on, press the fire button once to start charging.
2. Function of charging other electronic device:
(1). While the device is on, keep pressing the fire button and right regulatory button simultaneously, and then you enter into the sub menu.
(2). Press the right regulatory button two times to enter into the USB CHARGE item.
(3). Make sure the USB CHARGE is on.
(4). Press the fire button three times to switch to USB charging mode.
(5). When it is fully charged, the OLED screen will display USB CHARGE STOP.

Malfunction Indication and Protection:
No Atomizer Alert: When the device does not detect an atomizer, the OLED screen will display “NO ATOMIZER FOUND”.

Atomizer Low Alert: When the resistance of atomizer is lower than 0.1ohm in VW mode or lower than 0.05ohm in TC modes, the OLED screen will display “ATOMIZER LOW”.

Atomizer Short-circuit Protection: When atomizer short-circuit occurs, the OLED Screen will display “ATOMIZER SHORT”.

Temperature Alert: If the internal temperature of the device is over 70℃, the output will shut off automatically and the screen will display “DEVICE TOO HOT”.

Over 10 Second Protection: When the power button is pressed for over 10 seconds, the output will shut off and the OLED screen will display “OVER 10S PROTECT”.

Temperature Protection: In TC modes, If the actual temperature of coil reaches the set temperature, the device shows “TEMP PROTECT”.

Weak Battery Alert: In VW/TC mode, when the device installed with an atomizer is working and the voltage of battery is below 2.9V, the device shows “WEAK BATTERY”. Meanwhile, the output power will be reduced accordingly.

Lower Power Alert: If the power of battery is lower than 10%, the power symbol on the screen will flash.

Imbalanced Alert: When the different between the maximum and minimum cell voltage is equal or greater than 0.3V, the OLED screen will display “IMBALANCED BATTERIES” after inserting the USB cable. Then please take out the cells to charge or replace with freshly charged cells.

Chek USB Alert: When the voltage of the USB charger is equal or greater than 5.8V, the OLED screen will display “CHECK USB ADAPTER” after inserting the USB cable or vaping.

Charge Error Alert: When no current is detected in charging stage, the OLED Screen will display “CHARGE ERROR”.

Check Battery Alert: When one of the cells is not installed correctly, the OLED screen will display “CHECK BATTERY”.

Warranty
Please consult with your WISMEC distributors for warranty policy. We are not responsible for any damage caused by user error.
This warranty is only valid for authentic WISMEC products within warranty period from date of purchase by the end user.

Warning
1. Keep out of reach of children.
2. This products is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, persons who are allergic/sensitive to nicotine.

Contra-indication
1. Only have your product repaired by Wismec. Do not attempt to repair the unit by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, as this may damage the product. The appropriate operation temperature is within 0℃ to 45℃ while charging and -10℃ to 60℃ while in use.
3. Keep away from water.

Possible adverse effects
1. Use of this product may cause damage to health.
2. For people with adverse reaction after using this product, it is recommended to use the juice with lower nicotine content or no nicotine.


Monday, June 19, 2017

0

Wismec Sinuous P80 and Related products are launched

Hello every Wismec fans, we have launched new products, Sinuous P80 with Elabo Mini Full kit, and related products, such as Sinuous P80 Box Mod, Elabo Mini Atomzier and WS01 Triple 0.2ohm coils Head.
SINUOUS P80, a new flagship e-cig mod designed by sinuous designs, impresses us with its centered 510 connector and side OLED display. Powered by single 18650 cell, it reaches a mighty 80W output along with a sequence of other unique features including 2A quick charge, preheat and LED light with changeable colors. Featuring the intuitive slide-top fill solution and creative childproof lock system, the Elabo mini atomizer with powerful WS coil can perfectly pairs with SINUOUS P80.

If you want to know more information about them, you can visit our website at http://www.wismec.org, new products never let you down!

Wednesday, June 14, 2017

0

User Manual for Wismec Motiv Pod

Motiv POD Overview
How to use:
Power on/off: Press the fire button 5 times in quick succession, the indicator light will flash 5 times to indicate Motiv POD is ready for use. In the same way, the device is powered off after 5 presses.

Vaping: Press the button and inhale.

Charging: Simply charge the device by connecting it with a computer or a wall adapter via USB cable. The indicator light keeps in red when charging and goes out when it is fully charged.
E-liquid Filling: Unplug the cartridge with mouthpiece from the battery, and filling hole is at the side. Pull out the plug, and then inject the liquid directly into the cartridge. After filling, put the plug on again.
Turn Off or Shift Indicator Light: In power-off condition, long press the fire button until the indicator light is on. Then press the fire button to shift among the color of blue, green, indigo, red, purple, yellow, white or light off.

Functions:
Short-circuit Protection:
1. When the short circuit occurs before working, the indicator light flashes for 5 times and then power off.
2. When the short circuit occurs while working, the indicator light flashes for 3 times (reset).
Atomizer Protection: Motiv POD has a 15 second run time protection. The light will flash 10 times if the button is pressed for more than 15 seconds.
Low Voltage Protection: When the battery voltage drops lower than 3.3V, the indicator light flashes for 40 times and the device will power-off. Then please charge the device to power the device back on.
Resistance test: 
(1). When the resistance at the output end is larger than 5ohm, the light flashes slowly if you press the button.
(2). When the resistance at the output end is lower than 0.3ohm, the light flashes quickly for 5 times, suggesting the resistance is too low or potential short circuit.
Battery Display Function: The light will flash slowly or stay lit when battery quantity is high. On the contrary, the light flashes in frequency.
Warranty
Please consult with your WISMEC distributors for warranty policy. We are not responsible for any damage caused by user error.
This warranty is only valid for authentic WISMEC products within warranty period from date of purchase by the end user.

Warning
1. Keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers, pregnant or breast-feeding women, persons who are allergic/sensitive to nicotine.

Contra-indication
1. Only have your product repaired by Wismec. Do not attempt to repair the unit by yourself as damage or personal injury may occur.
2. Do not leave the product in high temperature or damp conditions, as this may damage the product. The appropriate operation temperature is within 0°C to 45°C while charging and -10°C to 60°C while in use.
3. Keep away from water.

Possible adverse effects 
1. Use of this product may cause damage to health.
2. For people with adverse reaction after using this product, it is recommended to use the juice with lower nicotine content or no nicotine.

Tuesday, June 13, 2017

0

The tech specs for Predator 228 Starter Kit



Product Introduction

Predator 228, designed by sinuous designs in USA, with dual dual replaceable 18650 cells and with 228W/50A Max Output. Support Quick Charge with 2A Max Charging Current, technology and protections ensures its safe and reliable. Also it can serve as a power bank to charge other electronic devices, you never worry about charging your phones at sometimes. Due to the Compact Size with Hidden Fire Button, the Predator 228 is Fashionable. you can exchange the battery cells very easy, and clean the Elabo atomizer very easy (Detachable Structure). Moreover, the Elabo with retractable top filling solution and innovative childproof lock system can perfectly fit the Predator 228. Two Optional Heads with Wonderful Taste and support Upgradeable Firmware with Identifiable Separate Battery Power. All features make it is wonderful, be worth to have one!
Predator 228
Battery Weight:166.2g
Size:43.6mm*29mm*86.7mm
Thread Type:510 spring loaded thread
Cell type:High-rate 18650 cell (discharge current should be above 25A)
Output Mode:VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output Wattage:1-228W
Resistance Range:0.05-1.5ohm for TC modes
0.1-3.5ohm for VW mode
Temperature Range:100-315°C/200-600°F (TC modes)
Maximum Charging Current:2A
Maximum Output Current:50A
Output Voltage Range:0.5-9V
Elabo
Length:52.8mm
Diameter:25mm
E-liquid Capacity:4.9ml (with Triple 0.2ohm Head: 40-80W)
4.6ml (with NS Triple 0.25ohm Head: 40-120W)
Atomizer weight:59.8g
Standard Configuration:
1*Predator 228 (no cells)
1*Elabo
1*Triple 0.2ohm Head
1*NS Triple 0.25ohm Head
1*QC USB Cable
2*User Manual (Predator 228 & Elabo)
1*Warning Card

Monday, June 12, 2017

0

Driving and Vaping

Driving and vaping, have you tried it? 

Thursday, June 8, 2017

0

Rebuildable coils, unprecedented DIY enjoyment.

Rebuildable coils, unprecedented DIY enjoyment.
What atomizer will you use with our Noisy Cricket II most often?
RDA, RTA or...?